PLEASE HELP!!!! Using Gyser to create a HP bar
Re: PLEASE HELP!!!! Using Gyser to create a HP bar
Well 5% of your gauge is going to be cut off. Because your x position is 60% and your width is 45%. You don't have much health missing and the gauge is full (green). Try moving the gauge a bit to the left...
-
- Posts: 17
- Joined: Fri Jan 17, 2014 12:07 am
Re: PLEASE HELP!!!! Using Gyser to create a HP bar
it looks a lot better in screen like that thank you, but still it is useless
Re: PLEASE HELP!!!! Using Gyser to create a HP bar
Only other thing I can think of is adding a space in your trigger line between > and $ You might have a whitespace not seen there.
-
- Posts: 17
- Joined: Fri Jan 17, 2014 12:07 am
Re: PLEASE HELP!!!! Using Gyser to create a HP bar
i have tried that already in a couple different ways thinking there may be an extra space like you were saying, nothing im starting to lose hope all ive done is change the color haha.
Re: PLEASE HELP!!!! Using Gyser to create a HP bar
It sounds like your trigger is still not working. My guess is white space issues. Just for now, try taking the end part off of it and just use^(\d+)/(\d+)
Perhaps the space we are seeing is a tab or several spaces or something. Once we get it working on some level, we can deal with the rest of it.
Perhaps the space we are seeing is a tab or several spaces or something. Once we get it working on some level, we can deal with the rest of it.
-
- Posts: 17
- Joined: Fri Jan 17, 2014 12:07 am
Re: PLEASE HELP!!!! Using Gyser to create a HP bar
Hey, I have messed with the trigger for a while now to no avail.
i have tried doing it many ways including settings it to a propt that is used during battle (hp: current/max )
nothing is working. Im starting to think that the trigger is not correctly pointed to the script could that be possible
i have tried doing it many ways including settings it to a propt that is used during battle (hp: current/max )
nothing is working. Im starting to think that the trigger is not correctly pointed to the script could that be possible
Re: PLEASE HELP!!!! Using Gyser to create a HP bar
Your prompt changes during battle?
Post screen shots of all your prompts.
Click the highlight check mark so that it highlights when it fires.
Get the trigger firing than worry about the gauge.
Post screen shots of all your prompts.
Click the highlight check mark so that it highlights when it fires.
Get the trigger firing than worry about the gauge.
Mapper of Bedlam
Re: PLEASE HELP!!!! Using Gyser to create a HP bar
I 100% agree. If the trigger isn't firing, then nothing that depends on the trigger is going to do anything, no matter how it is coded (good or bad). So you have to get the trigger working first.
^.*(\d+).*(\d+).*$
That pattern should match any line at all that has two numbers in it. If that doesn't work, then there is something else going on. If it does, then we can start narrowing it down from there until it is just getting your prompt.
^.*(\d+).*(\d+).*$
That pattern should match any line at all that has two numbers in it. If that doesn't work, then there is something else going on. If it does, then we can start narrowing it down from there until it is just getting your prompt.
Re: PLEASE HELP!!!! Using Gyser to create a HP bar
It looks like he's playing a GA-enabled MUD. Wouldn't isPrompt() be a much simpler solution?
Re: PLEASE HELP!!!! Using Gyser to create a HP bar
No idea. I have never been able to use isPrompt... so I don't know how it really works, or how to capture info from it.