Is there anyway to force mudlet 4.10.1 to use IPV4 as although my computer and the mud (Discworld) is IPV6 compatible it just hangs and never connects.
According to test-ipv6.com website i get a result of 9 out of 10. The failure is the DNS sever (BT i think) is either not able or not configured to use IPV6.
I am running Linux Mint 20.04 LTS and i can get round the problem by running the following commands in a terminal:-
sudo sysctl -w net.ipv6.conf.all.disable_ipv6=1
sudo sysctl -w net.ipv6.conf.default.disable_ipv6=1
sudo sysctl -w net.ipv6.conf.lo.disable_ipv6=1
But its a bit of a pain.
IPV4 versus IPV6
Re: IPV4 versus IPV6
We don't have a setting to force that, sorry. There are proxy settings - maybe that'll be an easier workaround?
Re: IPV4 versus IPV6
Unfortunately my knowledge of proxy settings is nil so I will stick to disabling IPV6 at my end. Thanks for your help.
-
- Posts: 4
- Joined: Thu Jul 16, 2020 6:49 pm
Re: IPV4 versus IPV6
Sounds to me like this is an IPTables issue. I very much doubt your DNS provider will be blocking IPV6.
Re: IPV4 versus IPV6
My router is from BT same as my service provider so I think they are blocking it
Re: IPV4 versus IPV6
On checking my hub configuration again it confirms that IPV6 is enabled and also that DNS is NOT available
- SlySven
- Posts: 1023
- Joined: Mon Mar 04, 2013 3:40 pm
- Location: Deepest Wiltshire, UK
- Discord: SlySven#2703
Re: IPV4 versus IPV6
This is an issue that has been hanging around our necks for a while:
https://github.com/Mudlet/Mudlet/issues/3053
https://github.com/Mudlet/Mudlet/issues/3791
https://github.com/Mudlet/Mudlet/issues/3053
https://github.com/Mudlet/Mudlet/issues/3791