Mudlet-2.0 release candidates [latest: Mudlet 2.0 final]

Post Reply
User avatar
Vadi
Posts: 4732
Joined: Sat Mar 14, 2009 3:13 pm

Re: 2.0 snapshots

Post by Vadi » Sun Jan 23, 2011 4:56 pm

I did get a crash while using the 'copy to HTML' feature - I think it's because some text came in while I was copying. Will get a backtrace next time.

Caled
Posts: 399
Joined: Thu Apr 09, 2009 4:45 am

Re: new features/functions in 1.2.0-pre8

Post by Caled » Mon Jan 24, 2011 9:43 am

Omni wrote:After finally remembering to start the logger, I logged a long Free-For-All in Lusternia. Once it finally ended I stopped logging and when I went to check the log I got this. A full 9 minutes of the log gone. You can see that it skips a large chunk at the end by the timestamps.
I just had perhaps 29 minutes of a 30 minute log not get saved to the log file.
I don't know how to help track this down.
I have save to html checked.

Caled
Posts: 399
Joined: Thu Apr 09, 2009 4:45 am

Re: 2.0 snapshots

Post by Caled » Mon Jan 24, 2011 9:45 am

Vadi wrote:I did get a crash while using the 'copy to HTML' feature - I think it's because some text came in while I was copying. Will get a backtrace next time.
I also got that, first time I tried to use it. I was in a rush to leave so I didn't pay attention to what was happening at the time, but I DID copy a fair bit - maybe 10 screens worth - by holding down the left mouse button and scrolling with the scroll wheel.

User avatar
Vadi
Posts: 4732
Joined: Sat Mar 14, 2009 3:13 pm

Re: 2.0 snapshots

Post by Vadi » Mon Jan 24, 2011 9:56 pm

Vadi wrote:I did get a crash while using the 'copy to HTML' feature - I think it's because some text came in while I was copying. Will get a backtrace next time.
Here it is:
Program received signal SIGSEGV, Segmentation fault.
TBuffer::bufferToHtml (this=<value optimized out>, P1=<value optimized out>, P2=<value optimized out>) at TBuffer.cpp:3161
3161 if( needChange
(gdb) bt
#0 TBuffer::bufferToHtml (this=<value optimized out>, P1=<value optimized out>, P2=<value optimized out>) at TBuffer.cpp:3161
#1 0x0000000000573468 in TTextEdit::copySelectionToClipboardHTML (this=0x2cb5a30) at TTextEdit.cpp:1322
#2 0x000000000065681c in TTextEdit::qt_metacall (this=0x2cb5a30, _c=QMetaObject::InvokeMetaMethod, _id=3, _a=0x7fff22892dc0) at tmp/moc_TTextEdit.cpp:83
#3 0x00007f7097a6f0f8 in QMetaObject::activate (sender=0x264fe60, m=<value optimized out>, local_signal_index=<value optimized out>, argv=0x0)
at /var/tmp/qt-src/src/corelib/kernel/qobject.cpp:3272
#4 0x00007f70982e3942 in QAction::triggered (this=0x6, _t1=false) at .moc/release-shared/moc_qaction.cpp:263
#5 0x00007f70982e4d40 in QAction::activate (this=0x264fe60, event=<value optimized out>) at /var/tmp/qt-src/src/gui/kernel/qaction.cpp:1256
#6 0x00007f7098786fa3 in QMenuPrivate::activateCausedStack (this=0x6b7a600, causedStack=..., action=0x264fe60, action_e=QAction::Trigger, self=true)
at /var/tmp/qt-src/src/gui/widgets/qmenu.cpp:993
#7 0x00007f709878cc12 in QMenuPrivate::activateAction (this=0x6b7a600, action=0x264fe60, action_e=QAction::Trigger, self=80) at /var/tmp/qt-src/src/gui/widgets/qmenu.cpp:1085
#8 0x00007f709834ac59 in QWidget::event (this=0x6a79a30, event=0x7fff22893910) at /var/tmp/qt-src/src/gui/kernel/qwidget.cpp:8187
#9 0x00007f709878c69b in QMenu::event (this=0x6a79a30, e=0x7fff22893910) at /var/tmp/qt-src/src/gui/widgets/qmenu.cpp:2410

User avatar
Jules
Posts: 118
Joined: Sun Oct 11, 2009 5:41 pm
Location: Plymouth State University - Sophomore

Re: 2.0 snapshots

Post by Jules » Mon Jan 24, 2011 11:01 pm

I have a quick, unrelated question about the 2.0 snapshot. Concerning the IRC client baked in, is there a way to change my name, instead of being known as Mudlet8675309? This could be an IRC-specific question (to which I know next to nothing about).

User avatar
Omit
Posts: 190
Joined: Sun Aug 01, 2010 10:54 pm
Location: Middle Earth
Contact:

Re: 2.0 snapshots

Post by Omit » Fri Jan 28, 2011 7:32 am

Is a problem with one of the new functions (setRoomUserData/getRoomUserData)....
User data is not being saved yet.

The following is a simple test script. It works fine the first session it runs but fails after you close mudlet and reopen(tested on a profile without any other mapping)
Code: [show] | [select all] lua
local test =  addRoom( 1 )
 if test then
  	echo("added a new room")
 	setRoomUserData( 1, "key", "This_is_a_Value_stored_with_a_room" )
else
  	echo("room found:")
	local data=getRoomUserData(1, "key" ) 
	echo(data.." -found this value")
end
Oh... and it would be nice if 'getRoomUserData' returned nil if the key does not exist (currently there is no good way to trap an error with it)
Last edited by Omit on Sat Jan 29, 2011 12:45 am, edited 1 time in total.

mirk
Posts: 2
Joined: Mon Jan 24, 2011 4:14 am

Re: 2.0 snapshots

Post by mirk » Fri Jan 28, 2011 9:59 am

I'm using Mudlet-2.0-rc1-snapshot14012011.exe and I've noticed a rather significant bug.

Scripts that are supposed to be deactivated are still executing themselves upon being edited. It would appear that the method mudlet uses to find bugs in scripts is to simply try and execute them.
Deactivated scripts do not run on start-up, and are working as intended in that regard.

How to replicate an example: Create a new script, and have it do somthing simple, like echo("HI!"), deactivate it, and then click the save button. You should notice 'HI!' printed to the main window, even though the script is supposed to be deactivated.

User avatar
Vadi
Posts: 4732
Joined: Sat Mar 14, 2009 3:13 pm

Re: 2.0 snapshots

Post by Vadi » Fri Jan 28, 2011 1:47 pm

When a script is deactivated, it only means that it's event handlers won't be calling it. Functions declared inside it are still callable and the script is called & executed on save.

Phoenix
Posts: 92
Joined: Tue Feb 15, 2011 3:23 am

Re: 2.0 snapshots

Post by Phoenix » Tue Feb 15, 2011 4:56 pm

I'm using the mac version, and have encountered a few bugs so far. I've attached a compilation of the ones I can capture.
From top to bottom:
Toolbar, the Help Chat button text gets cut off
In editing a trigger, the multiline drop down does not work - line delta can't be set. Also note on the right, the foreground and background highlight color boxes overlap
Spell checker is fairly buggy. I can't explain that one more than what you see.
Built-in IRC chat window can be maximized/restored, minimized, or closed. However, it can not be resized.

Bugs I can't screenshot:
When using a trackpad to scroll up, via multitouch, it will not scroll proper. This is unique to mudlet, so is not the trackpad -edit: When I use a scrollwheel on a real mouse, it works fine.
When I select text, and right click, I get a dialog box, "Copy/Copy as HTML". When I click either of these options, the text is correctly copied to the clipboard in the selected format. However, a second (slightly smaller) box pops up in the same position, with the same options. Clicking either of these options works as well correctly, and then the box disappears.
When trying to move a something out of a folder (IE: a trigger/alias/whatever), in the windows version you can drag it to the top (where it says Triggers/Aliases - Input Triggers/Scripts or whatever) and have it come out of the folder. This is not the case in the mac version, but would be infinitely helpful!
Attachments
mudletbugs.png
4 bugs.
mudletbugs.png (140.53 KiB) Viewed 4166 times

User avatar
tsuujin
Posts: 695
Joined: Fri Feb 26, 2010 12:59 am
Location: California
Contact:

Re: 2.0 snapshots

Post by tsuujin » Tue Feb 15, 2011 5:05 pm

In regards to the track pad I can confirm that it doesn't work. It also doesn't like to scroll the mapper, and makes zooming the 2D map impossible (because the sliders don't seem to work on it).

Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests